This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal...
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3" camera adapters.
155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like...
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
Adapter from M81 to M68 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M68 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.
This dew heater for 120mm diameter telescopes can be easily...
Adapter from M81 to M68 female for ESATTO 3" allows you to connect any camera or accessory with M68 male thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.
155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like...
Adapter from M81 to M54 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M54 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 65mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3" camera adapters.
ESATTO robotic focuser is also available in 3" version with 76.3mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and accessories like off axis...