Close

You’re shopping from: United States of America

Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en

FAST SHIPPING with express courier

Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"

PL3600242
Adapter from M56 to M54 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Pay in a single solution or over 3 installments of €25,96*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€77.87
VAT excluded

If you pay by bank transfer 75,53 €

Pay in a single solution or over 3 installments of €25,96*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

Optical length of adapter from M56 to M54 with stop ring for ESATTO 2" is 4mm (1,5mm adapter + 2,5mm stop ring).

Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"

Reviews

No reviews

Customers who bought this product also bought:

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

PL1000045
€31.97

If you pay by bank transfer 75,53 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
Dew heater for 250mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 250mm diameter telescopes

PLLFAS250
€81.15

If you pay by bank transfer 75,53 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 250mm diameter telescopes can be...
Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11 e RASA 8|Dovetail bars|Primalucelab en
  • Pack
In Stock
Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11...

PLLLOS495SAG925_
€145.90

If you pay by bank transfer 75,53 €

Be the first to review this product
This kit, composed of plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.
Losmandy style dovetail plate 495mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 495mm PLUS

PLLLOS495P
€89.34

If you pay by bank transfer 75,53 €

1 Reviews
The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...
Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5

PL3600237
€135.25

If you pay by bank transfer 75,53 €

Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...
M48 male to T2 female adapter|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

M48 male to T2 female adapter

PL3304248
€18.03

If you pay by bank transfer 75,53 €

Be the first to review this product
The M48 male to T2 female adapter allows you to connect accessories with M48 thread (48x0.75 female) to those with T2 thread (42x0,75 male). Sometimes in fact the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very...
Adapter ESATTO 2" for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

Adapter ESATTO 2" for ARCO 2"

PL3600412
€40.16

If you pay by bank transfer 75,53 €

Be the first to review this product
Adapter ESATTO 2" for ARCO 2" allows you to connect the rotator to ESATTO 2" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.
Adapter ESATTO 2" for GSO/Orion/TPO Ritchey-Chretien 6 and 8 inches|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter ESATTO 2" for GSO/Orion/TPO Ritchey-Chretien 6 and 8 inches

PL3600235
€64.75

If you pay by bank transfer 75,53 €

Be the first to review this product
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 152mm f/9 or 203mm f/8 (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. You can use the standard extensions that come with the RC telescope in order to install the focuser at a precise...
M56x1 male adapter for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

M56x1 male adapter for ARCO 2"

PL3600427
€40.16

If you pay by bank transfer 75,53 €

Be the first to review this product
M56x1 male adapter for ARCO 2" allows you to connect rotator to focusers that come with M56x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. ​PL3600427 adapter adds 1mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600427) becomes 21mm.
2" nosepiece for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

2" nosepiece for ARCO 2"

PL3600413
€40.16

If you pay by bank transfer 75,53 €

Be the first to review this product
2" nosepiece for ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

You might also like

2" visual back for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

2" visual back for ESATTO 2" and ARCO 2"

PL8410001
€69.67

If you pay by bank transfer 75,53 €

Be the first to review this product
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect...
M56 15mm extension tube for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
  • Not available
Not available
ESATTO 2"

M56 15mm extension tube for ESATTO 2" and ARCO 2"

PrimaLuceLab
PL3600286
€36.89

If you pay by bank transfer 75,53 €

Be the first to review this product
The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm thickness, it's made up of aluminum, black anodized and it has a M56 female on the camera side this way you can connect all the ESATTO 2" camera adapters.
View
ESATTO 2" robotic focuser|ESATTO 2"|Primalucelab en
  • Pack
In Stock
ESATTO 2"

ESATTO 2" robotic focuser

PrimaLuceLab
PLLEST2-B
€553.28

If you pay by bank transfer 75,53 €

2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
ESATTO 2" focuser with ARCO 2" rotator|ESATTO 2"|Primalucelab en
  • Pack
In Stock
ESATTO 2"

ESATTO 2" focuser with ARCO 2" rotator

PLLEST2ARCO2
€1,163.11

If you pay by bank transfer 75,53 €

Be the first to review this product
This bundle includes the ESATTO 2" focuser, the ARCO 2" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 90.5mm of thickness and 50.9mm of free aperture.
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
€1,061.48

If you pay by bank transfer 75,53 €

Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...