Close

You’re shopping from: United States of America

2" nosepiece for ARCO 2"|ARCO 2"|Primalucelab en

FAST SHIPPING with express courier

2" nosepiece for ARCO 2"

PL3600413
2" nosepiece for ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.
Pay in a single solution or over 3 installments of €13,39*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€40.16
VAT excluded

If you pay by bank transfer 38,96 €

Pay in a single solution or over 3 installments of €13,39*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 
2 nosepiece for ARCO 2

Reviews

No reviews

Customers who bought this product also bought:

Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6|Dovetail clamp|Primalucelab en
  • Pack
In Stock
Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6

PLLMORVLPB-EQ6_
€155.74

If you pay by bank transfer 38,96 €

Be the first to review this product
The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the EQ6 type mount. Thus you will have a better connection than the original EQ6 or N-EQ6 offering greater stability...
2" visual back for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

2" visual back for ESATTO 2" and ARCO 2"

PL8410001
€69.67

If you pay by bank transfer 38,96 €

Be the first to review this product
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect...
Adapter from M56 to T2 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter from M56 to T2 with stop ring for ESATTO 2" and ARCO 2"

PL3600218
€77.87

If you pay by bank transfer 38,96 €

Be the first to review this product
Adapter from M56 to T2 with stop ring for ESATTO 2" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the T2 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Losmandy style dovetail plate 140mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 140mm PLUS

PLLLOS140P
€40.16

If you pay by bank transfer 38,96 €

1 Reviews
The Losmandy style dovetail plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts with Losmandy plate (as the SkyWatcher SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...
Losmandy style dovetail plate 240mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P
€60.66

If you pay by bank transfer 38,96 €

Be the first to review this product
The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...
Adapter ESATTO 2" for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

Adapter ESATTO 2" for ARCO 2"

PL3600412
€40.16

If you pay by bank transfer 38,96 €

Be the first to review this product
Adapter ESATTO 2" for ARCO 2" allows you to connect the rotator to ESATTO 2" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.
M48x0.75 female adapter for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

M48x0.75 female adapter for ARCO 2"

PL3600424
€40.16

If you pay by bank transfer 38,96 €

Be the first to review this product
M48x0.75 female adapter for ARCO 2" allows you to connect rotator to focusers or correctors that come with M48x0.75 male thread and to control it through SESTO SENSO 2 installed on the focuser. ​PL3600424 adapter adds 6.7mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600424) becomes 26.7mm.
Temperature sensor for ECCO, SESTO SENSO and ESATTO|ESATTO 2"|Primalucelab en
In Stock
ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

SESTOSENSO-TEMP
€20.49

If you pay by bank transfer 38,96 €

Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
ARCO 2" camera rotator and field de-rotator|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

ARCO 2" camera rotator and field de-rotator

PrimaLuceLab
PLLARCO2
€569.67

If you pay by bank transfer 38,96 €

Be the first to review this product
ARCO 2" is the new low profile ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2” version of ARCO has a thickness of only 20mm and a free aperture of 50.9mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...
Eagle-compatible power cable for SkyWatcher AZ-EQ6 and AZ-EQ5 mounts - 115cm 3A|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher AZ-EQ6 and AZ-EQ5 mounts - 115cm 3A

PL1000026
€36.89

If you pay by bank transfer 38,96 €

Be the first to review this product
The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected accidentally...

More about this product:

You might also like

SESTO SENSO 2 robotic focusing motor|SESTO SENSO|Primalucelab en
  • -€25.08
In Stock
SESTO SENSO

SESTO SENSO 2 robotic focusing motor

PrimaLuceLab
SESTOSENSOII
€195.41 €220.49

If you pay by bank transfer 38,96 €

8 Reviews
SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...
ARCO 2" camera rotator and field de-rotator|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

ARCO 2" camera rotator and field de-rotator

PrimaLuceLab
PLLARCO2
€569.67

If you pay by bank transfer 38,96 €

Be the first to review this product
ARCO 2" is the new low profile ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2” version of ARCO has a thickness of only 20mm and a free aperture of 50.9mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...
ESATTO 2" robotic focuser|ESATTO 2"|Primalucelab en
  • Pack
In Stock
ESATTO 2"

ESATTO 2" robotic focuser

PrimaLuceLab
PLLEST2-B
€553.28

If you pay by bank transfer 38,96 €

2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
PLAY - Prima Luce AstrophotographY software|Software|Primalucelab en
  • Not available
Software

PLAY - Prima Luce AstrophotographY software

PLAY
Be the first to review this product
PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...
View
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
€1,061.48

If you pay by bank transfer 38,96 €

Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...