Close

You’re shopping from: United States of America

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port|EAGLE-type power cables|Primalucelab en

FAST SHIPPING with express courier

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port

PrimaLuceLab
PL1000042

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like SkyWatcher EQ6, HEQ5 and EQ5, Celestron AVX, Avalon-Instruments and Losmandy mounts.

Pay in a single solution or over 3 installments of €10,66*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€31.97
VAT excluded

If you pay by bank transfer 31,01 €

Pay in a single solution or over 3 installments of €10,66*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long.

 

By using this cable, you can power these devices through EAGLE:

  • SkyWatcher EQ6, HEQ5 and EQ5 mounts
  • Celestron AVX and CGEM mounts
  • Avalon-Instruments mounts
  • Losmandy mounts

 

EAN code
8059020772833

Reviews

No reviews

Customers who bought this product also bought:

PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"|Spacers and curved blocks|Primaluc
In Stock
Spacers and curved blocks

PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and...

PLLSAG925
€56.56

If you pay by bank transfer 31,01 €

1 Reviews
If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...
Cable Locking Clip (CLC) for ALTO|Spare parts|Primalucelab en
In Stock
Spare parts

Cable Locking Clip (CLC) for ALTO

PLLALTOLOCK
€6.56

If you pay by bank transfer 31,01 €

Be the first to review this product
This Cable Locking Clip (CLC) for ALTO allows you to lock to ALTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also order this as spare part if needed.
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread|ESATTO 2" LP|Primalucelab en
In Stock
ESATTO 2" LP

Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread

PL3600539
€77.87

If you pay by bank transfer 31,01 €

Be the first to review this product
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO 2" LP has an optical thickness of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also...
T2-50,8mm photographic adapter|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

T2-50,8mm photographic adapter

PL3304226
€19.67

If you pay by bank transfer 31,01 €

Be the first to review this product
The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 39mm free aperture so it does not create...
Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"

PL3600242
€77.87

If you pay by bank transfer 31,01 €

Be the first to review this product
Adapter from M56 to M54 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6|Dovetail clamp|Primalucelab en
  • Pack
In Stock
Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6

PLLMORVLPB-EQ6_
€155.74

If you pay by bank transfer 31,01 €

Be the first to review this product
The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the EQ6 type mount. Thus you will have a better connection than the original EQ6 or N-EQ6 offering greater stability...
ESATTO 2" robotic focuser|ESATTO 2"|Primalucelab en
  • Pack
In Stock
ESATTO 2"

ESATTO 2" robotic focuser

PLLEST2-B
€553.28

If you pay by bank transfer 31,01 €

2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
SESTO SENSO 2 37mm adapter|SESTO SENSO|Primalucelab en
In Stock
SESTO SENSO

SESTO SENSO 2 37mm adapter

SESTOSENSO-AD37II
€69.67

If you pay by bank transfer 31,01 €

Be the first to review this product
This 37mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 37mm diameter shaft, like 3,5" FeatherTouch and FSQ-130 (or other focusers with a 37mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers with...
Adapter from M110 to M68 with stop ring for ESATTO 4"|ESATTO 4”|Primalucelab en
In Stock
ESATTO 4”

Adapter from M110 to M68 with stop ring for ESATTO 4"

PL3600312
€159.84

If you pay by bank transfer 31,01 €

Be the first to review this product
Adapter from M110 to M68 with stop ring for ESATTO 4" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M110 thread of the ESATTO 4" draw tube. Thanks to the M68 stop ring for ESATTO 4" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
115mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

115mm PLUS support rings

PLLANSU115P
€220.49

If you pay by bank transfer 31,01 €

Be the first to review this product
The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...