This bundle includes GIOTTO 285 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
Pay in a single solution or over 3 installments of €352,46*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability:
Not available
€1,057.38
VAT excluded
3
If you pay by bank transfer 1.025,66 €
Pay in a single solution or over 3 installments of €352,46*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance).
Our dovetail clamps, unlike the common ones, offer...
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect...
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens.
This...
This bundle includes GIOTTO 320 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8” and 9.25” Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift and mirror...
The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance).
Our dovetail clamps, unlike the common ones, offer...
SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...