We are on summer holidays from August 3 to August 21. You can place your orders online anytime, shipments and support replies resume on Monday, August 24.
DX finder base can be installed on many telescopes to let you install finder supports from many brands.
The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2 dBi gain. Compatible with all the EAGLE models, 2 antennas included in every set.
The EAGLE control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug with screw to...
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
The "Guide rings support plate for ECCO" allows you to install the "60mm CompactGuide scope with PLUS 80mm guide rings" (PLLCG60) on the ECCO on a standard Vixen style finder shoe. This way you can use the guide scope with an autoguide camera or also with an eyepiece as an optical finder.
The EAGLE control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply, maximum current 3A) of the instrument they are designed for. On the other side they have the plug with screw to...
The EAGLE control unit can directly power supply SBIG STT and STF CCD camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...
The EAGLE control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected accidentally from...
The EAGLE control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from...
The EAGLE control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the plug with screw to prevent being disconnected accidentally from the...