Best sellers

12V power cable with banana...
In Stock
€36.89
Be the first to review this product
In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.
GIOTTO 255 Smart Flat Field...
Not available
GIOTTO flat field generators

GIOTTO 255 Smart Flat Field Generator

PLLGIOTTO255
€405.74
Be the first to review this product
GIOTTO 255 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 255mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
Adapter from M81 to M65...
In Stock
€122.95
Be the first to review this product
Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3" allows you to connect any camera or accessory with M65 female thread. Just thread this adapter to the M81 thread of ESATTO 3" or ARCO 3". Thanks to the M65 stop ring you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object. Optical...
Adapter ESATTO 3,5” LP for...
In Stock
€77.87
Be the first to review this product
Adapter ESATTO 3,5” LP for ARCO 3" allows you to connect the rotator to ESATTO 3,5" LP low profile focuser and control it through the special port on ESATTO. By adding this adapter (that has an optical thickness of 3mm) to ARCO 3", thickness of rotator becomes 26mm.
GPS antenna for EAGLE4
In Stock
Spare parts

GPS antenna for EAGLE4

PrimaLuceLab
PL3600088
€53.28
Be the first to review this product
This GPS antenna is included with every EAGLE4, EAGLE4 S and EAGLE4 PRO. This GPS antenna is not compatible with other and/or previous versions of the EAGLE control units.
Adapter ESATTO 4" for ARCO 3"
In Stock
ARCO 3"

Adapter ESATTO 4" for ARCO 3"

PL3600459
€118.85
Be the first to review this product
Adapter ESATTO 4" for ARCO 3" allows you to connect the rotator to ESATTO 4" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.
Adapter from M110 to M98...
In Stock
€159.84
Be the first to review this product
Adapter from M110 to M98 with stop ring for ESATTO 4" allows you to connect any camera or accessory with M98 female thread. Just thread this adapter to the M110 thread of the ESATTO 4" draw tube. Thanks to the M98 stop ring for ESATTO 4" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter ESATTO 2" for...
In Stock
€118.85
Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. By adding this adapter to ESATTO, your new focuser will have the same thickness of the standard one. Based on the camera and accessories...
0,5m Eagle power cable...
In Stock
EAGLE-type power cables

0,5m Eagle power cable extension cord

PrimaLuceLab
PL1000054
€36.89
Be the first to review this product
0,5m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.
140mm PLUS support rings
Not available
Support rings

140mm PLUS support rings

PLLANSU140P
€274.59
Be the first to review this product
The 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
Side by side Vixen plate...
  • Pack
In Stock
Side by side plates

Side by side Vixen plate 350mm PLUS

PLLPDVIX350P_
€176.23
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Side by side Vixen plate...
  • Pack
In Stock
Side by side plates

Side by side Vixen plate 240mm PLUS

PLLPDVIX240P_
€159.84
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...