Close

You’re shopping from: United States of America

Adapter ESATTO 3" for Borg 90FL and 107FL f3.9|ESATTO 3”|Primalucelab en

FAST SHIPPING with express courier

Adapter ESATTO 3" for Borg 90FL and 107FL f3.9

PL3600268

If you are searching for the most precise motorized focuser for Borg 90FL and 107FL f3.9, this adapter allows you to connect ESATTO 3" to these telescopes. Remove the original focuser of the Borg 90FL and 107FL f3.9 and install ESATTO 3". In order to reach the focus you can use the same photo adapters that you use with the standard focuser.

Pay in a single solution or over 3 installments of €53,28*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€159.84
VAT excluded

If you pay by bank transfer 155,04 €

Pay in a single solution or over 3 installments of €53,28*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

Adapter ESATTO 3" for Borg 90FL and 107FL f3.9 is composed by 2 rings, one to connect the microfocuser to the carbon fiber optical tube and another one to insert the Borg reducer/flattener in the focuser.

 

 

Adapter ESATTO 3 for Borg 90FL and 107FL f3.9

 

Adapter ESATTO 3 for Borg 90FL and 107FL f3.9

Reviews

No reviews

Customers who bought this product also bought:

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port

PL1000043
€31.97

If you pay by bank transfer 155,04 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...
ESATTO 3" robotic focuser|ESATTO 3”|Primalucelab en
  • Pack
In Stock
ESATTO 3”

ESATTO 3" robotic focuser

PrimaLuceLab
PLLEST3-B
€774.59

If you pay by bank transfer 155,04 €

Be the first to review this product
ESATTO robotic focuser is also available in 3" version with 76.3mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and accessories like off axis...
65mm extension tube for ESATTO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

65mm extension tube for ESATTO 3"

PL3600284
€113.11

If you pay by bank transfer 155,04 €

Be the first to review this product
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 65mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...
Eagle-compatible power cable for FLI camera - 115cm 8A|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable for FLI camera - 115cm 8A

PL1000002
€72.95

If you pay by bank transfer 155,04 €

Be the first to review this product
The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from the EAGLE.

You might also like

115mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

115mm PLUS support rings

PLLANSU115P
€220.49

If you pay by bank transfer 155,04 €

Be the first to review this product
The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...
Losmandy style dovetail plate 240mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P
€60.66

If you pay by bank transfer 155,04 €

Be the first to review this product
The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...
ECCO2, environmental computerized controller for EAGLE|ECCO|Primalucelab en
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

PrimaLuceLab
ECCO2
€159.84

If you pay by bank transfer 155,04 €

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
ESATTO 3" robotic focuser|ESATTO 3”|Primalucelab en
  • Pack
In Stock
ESATTO 3”

ESATTO 3" robotic focuser

PrimaLuceLab
PLLEST3-B
€774.59

If you pay by bank transfer 155,04 €

Be the first to review this product
ESATTO robotic focuser is also available in 3" version with 76.3mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and accessories like off axis...
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
€1,061.48

If you pay by bank transfer 155,04 €

Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...