Close

You’re shopping from: United States of America

Dew heater for 300mm diameter telescopes|Dew heaters|Primalucelab en

FAST SHIPPING with express courier

Dew heater for 300mm diameter telescopes

PrimaLuceLab
PLLFAS300

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.

This dew heater for 300mm diameter telescopes can be easily installed thanks to Velcro which ensures a strong and uniform fixing. Thanks to elastic fix, it can be installed on tubes from 300mm to 350mm diameter.

Pay in a single solution or over 3 installments of €29,78*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock

Delivery in 2-5 days from shipment with express courier


€89.34
VAT excluded

If you pay by bank transfer 86,66 €

Pay in a single solution or over 3 installments of €29,78*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

This dew heater is designed to be powered and controlled directly from the EAGLE but it can also be connected to any 12V external power source with RCA connector. Power consumption is 610mA.

 

 

Dew heater for 300mm diameter telescopes

Example of dew heater connected to one of the EAGLE power ports.

EAN code
8059020772956

Reviews

No reviews

Customers who bought this product also bought:

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

PL1000045
€31.97

If you pay by bank transfer 86,66 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
GIOTTO 320 with ALTO-2 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
In Stock
GIOTTO+ALTO bundles

GIOTTO 320 with ALTO-2 telescope cover motor

PLLGIOTTO320ALTO2
€487.70

If you pay by bank transfer 86,66 €

Be the first to review this product
This bundle includes GIOTTO 320 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
Eagle-compatible power cable for Astro-Physics mounts with CP4 controller 8A|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable for Astro-Physics mounts with CP4 controller 8A

PL1000032
€72.95

If you pay by bank transfer 86,66 €

Be the first to review this product
The EAGLE control unit can directly power supply Astro-Physics mounts. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally...
ECCO2, environmental computerized controller for EAGLE|ECCO|Primalucelab en
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

ECCO2
€159.84

If you pay by bank transfer 86,66 €

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"|Spacers and curved blocks|Primaluc
In Stock
Spacers and curved blocks

PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and...

PLLSAG925
€56.56

If you pay by bank transfer 86,66 €

1 Reviews
If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...
Dew heater for 50mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 50mm diameter telescopes

PLLFAS50
€40.16

If you pay by bank transfer 86,66 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 50mm diameter telescopes can be easily...
Dovetail Clamp Vixen+Losmandy PLUS|Dovetail clamp|Primalucelab en
In Stock
Dovetail clamps

Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLP
€55.74

If you pay by bank transfer 86,66 €

4 Reviews
The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance). Our dovetail clamps, unlike the common ones, offer...
Big Dovetail Clamp Vixen+Losmandy PLUS|Dovetail clamp|Primalucelab en
In Stock
Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPB
€118.85

If you pay by bank transfer 86,66 €

1 Reviews
The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy...
Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port

PL1000044
€31.97

If you pay by bank transfer 86,66 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port

PL1000043
€31.97

If you pay by bank transfer 86,66 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...