Close

You’re shopping from: United States of America

Guide scope support for ECCO|ECCO|Primalucelab en

FAST SHIPPING with express courier

Guide scope support for ECCO

ECCOSUP

ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).

Pay in a single solution or over 3 installments of €21,58*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€64.75
VAT excluded

If you pay by bank transfer 62,81 €

Pay in a single solution or over 3 installments of €21,58*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).

 

Guide scope support for ECCO

 

Guide scope support for ECCO

Reviews

No reviews

Customers who bought this product also bought:

Losmandy style PLUS dovetail plate with curved blocks for C8 or EdgeHD 800 and Meade SC 8""|Dovetail bars|Primalucelab en
  • Pack
In Stock
Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C8 or EdgeHD 800 and Meade SC...

PLLLOS350SAG8_
€129.51

If you pay by bank transfer 62,81 €

Be the first to review this product
This kit, composed of plate 350mm PLUS Losmandy style dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the Celestron C8 or EdgeHD 800 telescopes or Meade SC and ACF 8" telescopes.
Dew heater for 180mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 180mm diameter telescopes

PLLFAS180
€61.48

If you pay by bank transfer 62,81 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can be easily...
ECCO-NTC adapter for Dew Heater Rings|ECCO|Primalucelab en
In Stock
ECCO

ECCO-NTC adapter for Dew Heater Rings

PL1000061
€94.26

If you pay by bank transfer 62,81 €

Be the first to review this product
ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe. ECCO-NTC is...
Adapter from M56 to M48 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter from M56 to M48 with stop ring for ESATTO 2" and ARCO 2"

PL3600216
€77.87

If you pay by bank transfer 62,81 €

Be the first to review this product
M48x0.75 adapter for ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter ESATTO 3" for Takahashi FSQ85|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

Adapter ESATTO 3" for Takahashi FSQ85

PL3600271
€77.87

If you pay by bank transfer 62,81 €

Be the first to review this product
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your Takahashi accessories. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your...
Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

PL1000045
€31.97

If you pay by bank transfer 62,81 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11 e RASA 8|Dovetail bars|Primalucelab en
  • Pack
In Stock
Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11...

PLLLOS495SAG925_
€145.90

If you pay by bank transfer 62,81 €

Be the first to review this product
This kit, composed of plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.
Dew heater for 250mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 250mm diameter telescopes

PLLFAS250
€81.15

If you pay by bank transfer 62,81 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 250mm diameter telescopes can be...
Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port

PL1000043
€31.97

If you pay by bank transfer 62,81 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...
Vixen style dovetail plate 140mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Vixen style dovetail plate 140mm PLUS

PLLVIX140P
€31.97

If you pay by bank transfer 62,81 €

Be the first to review this product
The Vixen style dovetail plate 140mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 140mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...

More about this product:

You might also like

DX finder base|Optical finders|Primalucelab en
  • Not available
Not available
Optical finders

DX finder base

PLLBACEDX
€23.77

If you pay by bank transfer 62,81 €

Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
View
60mm CompactGuide scope with PLUS 80mm guide rings|Guiding systems|Primalucelab en
In Stock
Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60
€151.64

If you pay by bank transfer 62,81 €

1 Reviews
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
ECCO2, environmental computerized controller for EAGLE|ECCO|Primalucelab en
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

PrimaLuceLab
ECCO2
€159.84

If you pay by bank transfer 62,81 €

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
PLAY - Prima Luce AstrophotographY software|Software|Primalucelab en
  • Not available
Software

PLAY - Prima Luce AstrophotographY software

PLAY
Be the first to review this product
PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...
View
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
€1,061.48

If you pay by bank transfer 62,81 €

Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...