Close

You’re shopping from: United States of America

Temperature sensor for ECCO, SESTO SENSO and ESATTO|ESATTO 2"|Primalucelab en

FAST SHIPPING with express courier

Temperature sensor for ECCO, SESTO SENSO and ESATTO

PrimaLuceLab
SESTOSENSO-TEMP

This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with SESTO SENSO or ESATTO it's used in order to compensate focusing for changes in temperature (by using focusing softwares not provided with this sensor).

Availability: In Stock


€20.49
VAT excluded

If you pay by bank transfer 19,88 €

 

This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with SESTO SENSO or ESATTO it's used in order to compensate focusing for changes in temperature (by using focusing softwares not provided with this sensor).

Reviews

No reviews

Customers who bought this product also bought:

Eagle-compatible power cable for SkyWatcher AZ-EQ6 and AZ-EQ5 mounts - 115cm 3A|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher AZ-EQ6 and AZ-EQ5 mounts - 115cm 3A

PL1000026
€36.89

If you pay by bank transfer 19,88 €

Be the first to review this product
The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected accidentally...
40mm extension tube for ESATTO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

40mm extension tube for ESATTO 3"

PL3600317
€102.46

If you pay by bank transfer 19,88 €

Be the first to review this product
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 40mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...
9mm M48 extension|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

9mm M48 extension

PL3304809
€23.77

If you pay by bank transfer 19,88 €

Be the first to review this product
PrimaLuceLab M48 extensions are available in different lengths and they present on both sides of a M48 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...
Adapter ESATTO 2" for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

Adapter ESATTO 2" for ARCO 2"

PL3600412
€40.16

If you pay by bank transfer 19,88 €

Be the first to review this product
Adapter ESATTO 2" for ARCO 2" allows you to connect the rotator to ESATTO 2" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.
Dew heater for 50mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 50mm diameter telescopes

PLLFAS50
€40.16

If you pay by bank transfer 19,88 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 50mm diameter telescopes can be easily...
Vixen style dovetail plate 350mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Vixen style dovetail plate 350mm PLUS

PLLVIX350P
€64.75

If you pay by bank transfer 19,88 €

Be the first to review this product
The Vixen style dovetail plate 350mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 350mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...
Adapter ESATTO 3" for Meade 16 inches with 4” thread|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

Adapter ESATTO 3" for Meade 16 inches with 4” thread

PL3600292
€241.80

If you pay by bank transfer 19,88 €

Be the first to review this product
Adapter ESATTO 3" for Meade 16 inches with 4” thread allows you to connect ESATTO 3" to Meade LX200 SCT, LX200 GPS, LX200-ACF, LX600-ACF, LX800-ACF, LX850-ACF 16 inches telescopes or to all the telescopes that have 4-inch male thread
Guide rings PLUS 80mm|Guiding systems|Primalucelab en
In Stock
Guiding systems

Guide rings PLUS 80mm

PLLANGU80P
€53.28

If you pay by bank transfer 19,88 €

Be the first to review this product
If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors. Like all the other elements of the PLUS...
Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5

PL3600237
€135.25

If you pay by bank transfer 19,88 €

Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...
Adapter ESATTO 3" for ARCO 3"|ARCO 3"|Primalucelab en
In Stock
ARCO 3"

Adapter ESATTO 3" for ARCO 3"

PL3600458
€77.87

If you pay by bank transfer 19,88 €

Be the first to review this product
Adapter ESATTO 3" for ARCO 3" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.

You might also like

SESTO SENSO 2 robotic focusing motor|SESTO SENSO|Primalucelab en
  • -€25.08
In Stock
SESTO SENSO

SESTO SENSO 2 robotic focusing motor

PrimaLuceLab
SESTOSENSOII
€195.41 €220.49

If you pay by bank transfer 19,88 €

8 Reviews
SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...
ECCO2, environmental computerized controller for EAGLE|ECCO|Primalucelab en
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

PrimaLuceLab
ECCO2
€159.84

If you pay by bank transfer 19,88 €

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
ESATTO 3" robotic focuser|ESATTO 3”|Primalucelab en
  • Pack
In Stock
ESATTO 3”

ESATTO 3" robotic focuser

PrimaLuceLab
PLLEST3-B
€774.59

If you pay by bank transfer 19,88 €

Be the first to review this product
ESATTO robotic focuser is also available in 3" version with 76.3mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and accessories like off axis...
ESATTO 2" robotic focuser|ESATTO 2"|Primalucelab en
  • Pack
In Stock
ESATTO 2"

ESATTO 2" robotic focuser

PrimaLuceLab
PLLEST2-B
€553.28

If you pay by bank transfer 19,88 €

2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
ESATTO 2" LP low profile robotic focuser|ESATTO 2" LP|Primalucelab en
  • Pack
In Stock
ESATTO 2" LP

ESATTO 2" LP low profile robotic focuser

PLLEST2LP-B
€717.21

If you pay by bank transfer 19,88 €

Be the first to review this product
ESATTO 2” LP is the most compact low profile robotic focuser specially designed for telescopes with low backfocus and it can fit also the Celestron EdgeHD 8"! At just 32mm of thickness, ESATTO 2” LP provides a large 50.9mm free aperture with 10mm of travel, 5 kg of payload capacity and an incredible resolution of 0.03 microns per step! And like all the...