Best sellers

85mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

85mm PLUS support rings

PLLANSU85P
€176.23
Be the first to review this product
85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel. Like all the other...
235mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

235mm PLUS support rings

PLLANSU235P
€430.33
Be the first to review this product
235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision...
Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A port|EAGLE-type power cables|Primalucelab
In Stock
€40.16
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
C82 pier for concrete base|Tripods and piers|Primalucelab en
  • Pack
In Stock
Tripods and piers

C82 pier for concrete base

C82-C-B
€405.74
Be the first to review this product
When you want to install a telescope under a dome, the pier is preferable since not only it provides very good stability but it also needs for less space and it prevents the telescope installed on the mount touches the tripod. Using the pier, you can safely use your instrument! This pier can be used with optional adapters for EQ6 / EQ6-R / AZ-EQ6 / CGEM...
Eagle-compatible power cable for SkyWatcher EQ8 mounts - 115cm 8A|EAGLE-type power cables|Primalucelab en
In Stock
€36.89
Be the first to review this product
The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally...
T2-50,8mm photographic adapter|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

T2-50,8mm photographic adapter

PL3304226
€19.67
Be the first to review this product
The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 39mm free aperture so it does not create...
Adapter ESATTO 2" for Takahashi telescopes with M72 thread|ESATTO 2"|Primalucelab en
In Stock
€45.08
Be the first to review this product
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus. By adding the M71/M72 adapter, you can connect it also to the Takahashi Mewlon...
Eagle power cable with Anderson connector with 16A fuse- 250cm|EAGLE|Primalucelab en Eagle power cable with Anderson connector with 16A fuse- 250cm|EAGLE|Primalucelab en 2
In Stock
€48.36
Be the first to review this product
In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has an Anderson connector with 16A fuse to...
Side by side Losmandy plate 350mm PLUS|Side by side plates|Primalucelab en
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 350mm PLUS

PLLPDLOS350P_
€184.43
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Side by side Losmandy plate 240mm PLUS large dovetail clamps|Side by side plates|Primalucelab en
  • Pack
In Stock
€298.36
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Eagle-compatible power cable for FLI camera - 115cm 8A|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable for FLI camera - 115cm 8A

PL1000002
€72.95
Be the first to review this product
The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from the EAGLE.