EAGLE computer is an open platform for astrophotography with telescopes When we started the development of the EAGLE, back in 2013, we immediately decided to integrate a Windows computer in...
EAGLE LE, EAGLE4, EAGLE5 S/PRO/XTM: which model to choose EAGLE, our advanced computer for telescopes and astrophotography is available in different versions that offer different features, sensors, computing power...
How to remotely power and control the observatory telescope with EAGLE Thanks to its advanced features, the EAGLE is designed to let you remotely power and control even an observatory telescope,...
Troubleshooting: EAGLE doesn’t create WiFi network and EAGLE Manager X shows a yellow mark close to AP When you power on the EAGLE, Windows starts and, after a short time, EAGLE Manager X is automatically launched: this...
The battery we suggest for your EAGLE-powered telescope Choosing the correct battery for a complete telescope is critical since, usually, astrophotography setups are composed by many devices that...
Troubleshooting: EAGLE Manager can’t control EAGLE’s power and USB ports This issue may be related to a driver conflict that appears after you install a new device that uses the...
Remote observatory control with EAGLE Astronomical observatories are often installed in remote and isolated places to avoid light pollution. In this article we will see...
How to choose the correct power source for your EAGLE EAGLE allows you to distribute power to many devices used in telescopes and astrophotography (such as computerised mount, cooled camera,...
Improve your telescope cable management with EAGLE Cable management in an astrophotography telescope is very difficult as it is necessary to use many devices (mount, camera, autoguider,...
Installing EAGLE onto your telescope EAGLE has been specifically designed to be installed onto telescopes thanks to the PLUS aluminum chassis that offers many threaded...
Troubleshooting: EAGLE Manager no longer runs at startup EAGLE Manager is designed to automatically launch when you turn on the EAGLE, after Windows boot. If this doesn’t happen,...
What is the allowed voltage in the battery or power unit for the EAGLE? The computer that is built in into the EAGLE is able to boot when you connect the EAGLE to a...