QHYCCD QHY5III178 monochrome camera

FAST SHIPPING with express courier

QHYCCD QHY5III178 monochrome camera

QHY5III178M

QHY5III178 is the USB 3.0 planetary monochrome camera that uses the IMX178 STARVIS back illuminated sensor and that is also excellent for autoguide thanks to high sensitivity and ST4 autoguider integrated port. The high-speed USB 3.0 connection allows you to record up to 50 images per second at maximum resolution of 3072 x 2048 pixels!

The IMX178 STARVIS sensor provides an extremely high sensitivity, also in near infrared, and makes this camera an excellent choice for people searching for a mode with low pixel dimensions (2.4 microns).

Pay in a single solution or over 3 installments of €113,39*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: Not available
€340.16
VAT excluded

If you pay by bank transfer 329,96 €

Pay in a single solution or over 3 installments of €113,39*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.


 

The QHY5III178 with monochrome sensor is the perfect choice for people searching for a model with low pixel dimensions and that has still a not too high price. Thanks to the latest Sony IMX178 STARVIS back illuminated sensor, the QHY5III178 camera is outstanding for both Moon and planets imaging at a high magnifications and for autoguiding!

 

QHYCCD QHY5III178 monochrome camera

 

QHY5III 178M: use as planetary camera

The QHY5III178 uses the Sony IMX178 STARVIS back illuminated sensor latest generation monochrome sensor. This sensor offers great technical specifications:

- high resolution (3072 x 2048 pixel) 
- compact pixels dimensions (2,4 micron)
- extremely low readout noise

Thanks to electronics with USB 3.0 connection to control PC, the QHY5III178 allows you to record many images per second (up to 50 fps at full resolution - note: the recorded fps number also depends on the control PC speed). So you can get video composed of more images that, processed with special software for astrophotography, enable you to achieve better results!

 

 

 

 

QHYCCD QHY5III178 monochrome camera

 

QHY5III 178M: use as autoguider

These advanced technical features make it very good not only as a planetary camera but also for those looking a guide camera. It has a built-in ST4 port (with LEMO connector, known to be very robust - the ST4 guide cable on the mount side instead has the classic connector for connection to the most popular mounts) that allows direct connection to the mount.

 

 

 

 

 

QHY5III 178M: sophisticated design

The QHY5III178 camera has the design of the previous QHY5II series, with 31.8mm diameter accessory shape. In this way QHYCCD got better efficiency in heat transfer to the outside of the camera body. This particular design also provides a very low back focus makes the camera ideal for off-axis guiders.

 

 

QHYCCD QHY5III178 monochrome camera

 

QHY5III178 monochrome camera - scope of delivery:

- QHY5III178 camera
- USB cable for PC connection
- ST4 cable for autoguide
- Parafocal ring
- C-31,8mm nose

 

 

 QHYCCD planetary and autoguide CMOS cameras comparison

In this table we have summarized main features of QHYCCD's planetary and autoguide CMOS cameras to allow you to easily compare and choose the best one based on your telescope.

Reviews

No reviews

You might also like