Version 1.0.2 11/04/2023:

1) Released EAGLE Manager X 1.0.2 with support to older EAGLE units (up to EAGLE3)


Version 1.1.2 27/04/2023:

1) Bug fixes


Version 1.1.4 09/05/2023:

1) Bug fixes


Version 1.1.6 15/05/2023:

1) Improved WiFi remote control from macOS



Version 1.1.7 06/06/2023:

1) New overcurrent notification.
2) New firmware availability notification.
3) Improved ECCO connection reliability
4) Fixed USB label not changeable when removed.
5) Fixed crash when ECCO COM port driver is not properly installed.



Version 1.1.8 16/06/2023:

1) Access point error fix



Version 1.1.9 20/06/2023:

1) Fixed firmware Update Crash;
2) Fixed USB empty label on Eagle4 and lower;
3) Fixed webserver "setregout" command which occasionally does not set the output voltage;
4) Added PSU FW 5.15.



Version 1.2.1 04/09/2023:

1) Fixed error in setting dew heaters power ports




Version 1.2.2 07/09/2023:

1) Fixed EAGLE Manager X: Webserver for interface to ASCOM Switch
2) Fixed EAGLE Manager X: fixed indexes on ports EAGLE3 webserver EAGLE3
3) Fixed EAGLE Manager X: fixed message UNDERVOLTAGE
4) Updated PLL ASCOM Switch Driver 3.1: fixed support for older EAGLE units
4) Updated PLL ASCOM Switch Driver 3.1: fixed bug with RCA ports
4) Updated PLL ASCOM Switch Driver 3.1: added check of EagleManager version




Version 1.2.3 18/09/2023:
1) Fixed time setting from GPS




Version 1.2.4 25/09/2023:
1) Fixed error if connection with a client with static IP address




Version 1.2.5 12/10/2023:
1) Fixed issue where ports 1-4 current limits were not set on startup.
2) When ECCO is connected to the USB A-D ports, it automatically reconnects when port is activated.
3) Improved Dew heaters temperature control with ECCO2
4) Fixed problem that may occur when opening the Advanced Settings menu.
5) Fixed problem on EAGLE4/LE with webserver /getall request



Version 1.3.0 04/12/2023:
- updated EAGLE Manager X to 1.3.0 version: updated settings of RCA ports, fixed bug timeout serial port, temperatures read from Webserver include temperatures in °C and °F, added EYE reading in Bortle Scale.
- updated driver ASCOM Switch v.3.2 (fixed bug with power indicators, added status control of RCA ports)
- updated driver ASCOM Environmental Conditions v.3.1 (fixed bug with EAGLE data type, added driver version in the settings window, added check of degrees units (C/F) )



Version 1.3.1 05/12/2023:
- fixed a notification error about PLL ASCOM CoverCalibrator drivers



Version 2.0.0 12/04/2024:
- updated EAGLE Manager X to 2.0 with new GHOST mode
- updated PLL ASCOM Switch v3.3
- updated PLL ASCOM ObservingConditions v3.2



Version 2.1.0 13/05/2024:
- Storage of the Dark Mode ON/OFF settings in the Manager;
- Ability to set Dark Mode "after startup" and "before shutdown";
- Waiting indicator while connecting the device in GHOST mode during setup;
- Corrected GHOST area appearance to allow visibility of "Disabled" string.
- Corrected a few language translations
- Performs 5 connection attempts to the PSU at 1s intervals before displaying the "unable to connect" message.
- Modified PSU connection error message to "EAGLE Manager X fails to start”.
- Corrected pllWorkingService to manage hidden Virtual COMs that were preventing it from allocating its virtual COMs.
- Reduced GHOST http request Timeout.
- Updated project dependencies. 



Version 3.0 03/02/2025:
- Added support for EAGLE6



Version 3.0.1 11/02/2025:
- Improved labels in Advanced Settings
- Bug fixes



Version 3.0.2 25/02/2025:
- Added PLL ASCOM SafetyMonitor v1.0
- Bug fixes



Version 3.0.3 28/03/2025:
- Bug fixes



Version 3.1.0 06/10/2025:
- Updated PLL ASCOM SafetyMonitor v1.1
- Bug fixes
