Technical support:
+39 0434 1696106 (Mon-Fri) or email!
0item(s)

You have no items in your shopping cart.

Technical support:
+39 0434 1696106 (Mon-Fri) or email!

Product was successfully added to your shopping cart.

Spacers and curved blocks

Set Descending Direction

   

5 Item(s)

  1. PLUS raisers for EAGLE CORE

    PLUS raisers for EAGLE CORE allow you to install, on the side of its body, the 80mm PLUS guide rings without them to touch the EAGLE CORE body. This way you can install the guide scope on the side and fix the DSLR camera with its photo lens on top. This is the way to use your DSLR camera to record long exposure astrophotography of deep-sky objects with autoguide and without a telescope!

    €25.00
    22% tax incl
  2. PLUS 10mm spacers

    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (25mm) which are provided in the package (4 screws).
    €29.00
    22% tax incl
  3. PLUS 20mm spacers

    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (35mm) which are provided in the package (4 screws).
    €34.00
    22% tax incl
  4. PLUS 30mm spacers

    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 30mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system. In fact they have four holes, with 20mm separation to fix PLUS Vixen dovetail bars and guide rings and 55mm for PLUS Losmandy dovetail bars. The PLUS spacers have holes to fix the other elements always with M6 screws but of greater length (45mm) which are provided in the package (4 screws).
    €39.00
    22% tax incl
  5. PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"

    If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm Losmandy PLUS dovetail bar on the telescope.

    €49.00
    22% tax incl
Set Descending Direction

   

5 Item(s)