You have no items in your shopping cart.
Wide variety of imaging sensors
Light weight, compact design
Centered optical axis for optimum instrument balance
Ultra reliable even-illumination (photometric) mechanical shutter
Support for iOS, Android, Windows, Macintosh, and Linux
WiFi 802.11 b/g/n and USB 2.0 communications interfaces
Full frame image buffering eliminates readout artifacts and provides 100% reliable wireless download
2-Stage TE cooling for typical maximum -50C delta T
Twin variable speed fans
High accuracy temperature regulation
Built-in RBI Pre-flash (full frame front-illuminated sensors only)
External TTL trigger inputs and output
Included 110V / 220V power supply and optional 12VDC operation
User-rechargeable desiccant plug
Built-in 1/4-20 tripod mount
Support for high precision 8-position filter wheels
Support for external guide head, self-guiding filter wheels, and adaptive optics
Bulletproof firmware update capability – virtually impossible to “brick”
Aluma is designed to operate either via USB 2.0 or WiFi 802.11 b/g/n. Designed from the ground-up to support operation on any modern computing platform, Aluma is compatible with iOS, Android, Windows, Macintosh, and Linux. Fully-documented and supported drivers are available for all platforms, including ASCOM drivers. The Aluma camera interface specification is fully documented, supporting the development of fully custom interfaces.
All Aluma models ship with MaxIm AL for Windows – a special version of MaxIm DL specific to SBIG cameras. In addition our new Aluma software for iOS and Android is under development. Aluma also supports third-party applications through ASCOM and native SBIG drivers.
Aluma cameras measure just 4.25″ x 4.25″ x 4.0″ with handles (3.5″ without handles) and weigh just 2.2 lbs (1 kg).
All Aluma cameras include a mechanical shutter, which is used for both dark/bias calibration frames and for shuttering exposures on full frame sensors. Rather than using a complex iris shutter, which are prone to failure, the Aluma uses a twin vane shutter and direct drive motor for high repeatability, reliability, and extremely long life. The shutter is designed to be “even illumination” for the best accuracy in photometric measurements. The left image shows a flat field image taken with a camera using an iris type shutter. The right image is a flat field image taken under the same conditions using our even-illumination shutter.
The Aluma uses two-stage TE cooling, twin variable-speed fans and a heat sink design optimized using computer thermal flow simulation. This permits high performance using air cooling only.
The Aluma 8300 uses the popular 8 megapixel ON Semi (formerly Kodak) KAF-8300-AXC sensor. The sensor has 3448 x 2574 pixels at 5.4 microns square, for a 17.96 mm x 13.52 mm optical format. This is a high sensitivity full frame CCD sensor with low dark current and low read noise. Combining this high performance sensor with Aluma’s high cooling performance and low readout noise results in exceptionally clean images. This sensor includes microlens technology that concentrates light on the sensitive area of each pixel. The CCD’s sensitivity peaks in the center of the visible spectrum at 550 nm, and maintains high sensitivity throughout the visible spectrum.
MaxIm AL Software
iOS / Android software coming soon (via app store)
Deluxe carrying case
Universal power supply (110V / 220V, 50-60 Hz)
2″ Nosepiece adapter
USB flash drive containing software, drivers, and documentation
15 foot (4.5 m) USB cable
Tracking interface cable
|Type:||Camera CCD raffreddata|
|Resolution||3326 x 2504 pixels|
|Sensor dimensions (mm)||17.96 x 13.52|
|Sensor diagonal (mm)||22.6|
|Pixels dimensions (µm)||5.4|
|A/D converter||16 bit|
|Cooling||-50°C rispetto a T ambientale|
|Readout Noise (e-)||10 e- typical|
|ST4 integrated autoguide port||Yes|
|Telescope interface||Filetto T femmina (42x0,75)|
|Connection to PC||USB 2.0|
|Power||External 12V 5A|