You have no items in your shopping cart.
The RC1000 is a complete 1-meter observatory-class telescope featuring a direct drive altitude-azimuth (Alt-Az) mounting system designed and engineered by PlaneWave. Light-weighted optics are made of zero expansion fused silica materials for excellent thermal stability and maximum throughput. The dual Nasmyth ports allow two instruments to be installed simultaneously, and a computer-controlled M3 mirror allows either instrument to be remotely selected in seconds. With direct drive motors, high resolution encoders, zero backlash and no periodic error, the RC1000 sets a new standard in 1-meter class observatory telescopes.
Dual Nasmyth focus, allowing simultaneous mounting of two instruments or easy switching between visual and imaging use
Direct-drive motors on each axis for smooth, fast, and virtually silent movement of the telescope
High resolution encoders on each axis for precise positioning
Zero periodic error
PointXP mount modeling software
Field de-rotator / rotational field framing
Integrated primary mirror shutter cover
Fused Silica has a coefficient of thermal expansion six times lower than Borosilicate (Pyrex) glass, which means that as it cools down, fused silica preserves its shape to a high degree of accuracy. This translates into consistent optical performance and unchanging focus over temperature changes.
The Nasmyth Focus is along the altitude axis so there are virtually no balancing issue as you change out equipment. Eyepieces remain at a constant wheelchair-accessible height, greatly simplifying access to the telescope for public observatories. The rotating tertiary mirror allows you to switch from one Nasmyth port to the other in just seconds, allowing observers to easily transition between imaging and visual use.
The RC1000 includes an integrated rotator for the tertiary mirror, with magnetic locks to position the mirror precisely for either Nasmyth focus position. The rotator can move from one port to the other in under 10 seconds.
Direct Drive motors mean that there are no gears to cause backlash and periodic error. With high-resolution encoders providing the feedback for the direct drive motors, not only will the telescope track without periodic error or have any backlash at all, but the mount will be able to counter against wind gusts. The direct drive motors can move the telescope at incredible speeds for tracking satellites or just to minimize target acquisition time.
Protects the primary mirror from unwanted dust and moisture with this integrated four shutter automated system, fully controllable with PlaneWave's PWI software.
|Focal length (mm):||6000mm|