Technical support:
+39 0434 1696106 (Mon-Fri) or email!
0item(s)

You have no items in your shopping cart.

Technical support:
+39 0434 1696106 (Mon-Fri) or email!

You are on european store, if you’re shopping from Extra-UE Country please visit our Worldwide store

Product was successfully added to your shopping cart.
  • QHYCCD camera QHY5III462C colori QHYCCD camera QHY5III462C colori

Free shipping in most EU countries

for order at least €500

QHYCCD QHY5III462C color camera

Product code: QHY5III462C

Be the first to review this product

Quick Overview

The QHY5III462C camera by QHYCCD uses Sony's latest generation IMX462 back-illuminated sensor with extended red and near infrared response. It has nearly double the red and NIR sensitivity as previous generation BSI sensors and even greater sensitivity compared to front illuminated sensors. Because the RGB filters become transparent at NIR wavelengths, the camera captures RGB color images in visible light and monochrome images in NIR.

Availability: In stock

€365.00
22% tax incl
if you pay by bank transfer €354.05

Details

Super high conversion gain: boosts Low Light Sensitivity

Sony's new sHCG (Super High Conversion Gain) technology produces a higher voltage from fewer photons resulting in greater sensitivity even at very low levels of light. With sHCG technology, even in visible light, the QHY5III462C has higher sensitivity than the back-illuminated IMX290 based cameras.

 

QHYCCD QHY5III462C color camera

 

High frame rate: 135FPS

To produce the highest detail with the greatest dynamic range, many planetary imagers prefer to capture hundreds or thousands of images in as short a time as possible and then process the results into one final combined image. This requires high sensitivity for short exposures and low read noise for combining multiple images. The QHY5III462C will output 135 frames per second at full resolution. With its exceptionally high QE and extraordinarily low (0.5e-) read noise, it is the perfect camera for planetary imaging.

 

 

QHYCCD QHY5III462C color camera

 

 

Filters for visible and IR imaging: IR850 for NIR and UV-IR for color

The QHY5III462C comes with two free 1.25-inch filters. The IR850 filter is a long wavelength pass filter that allows wavelengths > 850nm to pass through. The UV/IR filter passes visible light and blocks the NIR. With these two filters you can capture both RGB color images and NIR monochrome images with the same camera. At NIR wavelengths, the RGB filters become transparent and the camera behaves like a monochrome IR camera.

 

 

QHYCCD QHY5III462C color camera

 

QHYCCD QHY5III462C color camera - scope of delivery:

- QHY5III462C camera
- USB cable for PC connection

- ST4 cable for autoguide
- IR-Pass 31,8mm filter
- UV/IR Cut 31,8mm filter
- Parafocal ring
- C-thread adapter

 

 

 

 

QHYCCD planetary and autoguide CMOS cameras comparison

In this table we have summarized main features of QHYCCD's planetary and autoguide CMOS cameras to allow you to easily compare and choose the best one based on your telescope.

Technical specifications

Type: Camera CMOS non raffreddata
Sensor Color
Sensor Sony IMX462
Resolution 1920 x 1080
Sensor dimensions (mm) 5.6 x 3,1mm
Sensor diagonal (mm) 6.4
Pixels dimensions (µm) 2.9
A/D converter 12 bit
Cooling No
Readout Noise (e-) 0.5e-
ST4 integrated autoguide port Yes
Telescope interface Portaoculari 31,8mm
Connection to PC USB 3.0
Power USB powered
Backfocus (mm) 11mm
Weight (gr.) 88g

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Vote