You have no items in your shopping cart.
The EAGLE has 3 0-12V, adjustable voltage power supply ports where you can connect your dew heaters without the need of an external controller. Using the EAGLE Manager software you can activate these ports and manually adjust the voltage to activate the relative dew heater. ECCO instead, thanks to the integration of appropriate temperature and humidity sensors, adds to the EAGLE, dew heater power automatic control: by monitoring in real time the temperature of the optics of your instruments (through the appropriate probes, a maximum of 3 probes are supported), air temperature and humidity (via the sensors included in ECCO body). ECCO calculates the dew point and then automatically adjusts the power of your dew heaters to prevent any dewing!
We decided to call it ECCO not only because it is the “Environmental Computerized COntroller” but also because it is very easy to use (in Italian, ECCO means "There you go"). In fact, just connect the temperature sensors (to be fixed near the optics of your telescope) and the USB cable to one of the EAGLE USB ports (ECCO is compatible with second generation EAGLE equipped with dew heaters power ports), and press CONNECT button in the EAGLE Manager (it needs EAGLE Manager at least version 2.0). You can see in real time the dew point calculation, the temperature detected by the temperature probes you have installed and the variation of the power supplied by the EAGLE to the dew heaters. ECCO does not require external power supply!
EAGLE Manager starting from version 2.0 supports ECCO with dew point calculation and automatic control of power of dew heaters
ECCO can be installed on any finder base like our DX base or Celestron, SkyWatcher or GSO telescopes. It is therefore very easy to connect to your telescope. If you do not have a standard finder base, you can install one of the many optional bases and then connect the ECCO. We designed ECCO as an external module of the EAGLE and not as an integrated instrument because, if it were internal to the EAGLE, its measurements of temperature and humidity of the air would be influenced by the (even if weak) heat created by the EAGLE during use. With an external module, the data recorded by ECCO is incredibly precise.
ECCO installed on AIRY refractor telescope, connected to the EAGLE with USB port and with 2 external temperature probes
ECCO installed on a Schmidt-Cassegrain telescope, connected to the EAGLE with USB port and with 2 external temperature probes
As with all our products, ECCO offers you innovative features in a product characterized by refined design and high quality construction. Made entirely of 6061 T6 aluminum and produced using CNC machines, ECCO is completely red anodized to increase the strength and durability of the materials. It can also be used as a finder support by adding the optional "Finder support for ECCO". You can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
ECCO used together with the "Guide scope support for ECCO" in order to use a guide scope or a finder.
ECCO dimensions with position of integrated sensors and connectors for external sensors.
- ECCO with connection to finder show
- 2 temperature probes
- micro USB cable
lo attendevo da lungo tempo, infondo si tratta del compendio perfetto per ogni rig.. è completamente plug & forget, una volta calibrate le sonde permettono di tener sotto controllo un setup composto da due telescopi in parallelo ed il telescopio guida.. Inoltre il form factor lo posiziona in un punto perfetto. Must have assoluto
Un oggettino veramente utile....mi permette di gestire l'alimentazione delle fasce anti condensa senza sprecare batteria. Rileva temperatura ed umidità ambientali e calcola il punto di rugiada...da qui decide o meno di accendere le fasce anti condensa comparando i valori di temperatura con quelli rilevati dalle due sonde esterne collocate sotto le fasce. I settaggi sono minimi e semplici : si accende da solo tramite Eagle Manager e dopo aver calibrato le due sonde è già attivo. Comodi i controlli che permettono di fissare il delta temperatura rispetto al punto di rugiada e la velocità con cui viene data potenza alle fasce per il suo raggiungimento (isteresi). Per me che esco sempre in quota per le riprese è un bel risparmio di energia prelevata dalle batterie. Come sempre, una volta che hai un oggetto Primalucelab, non ne puoi più fare a meno. Complimenti ai ragazzi.