You have no items in your shopping cart.
By connecting the QHYCCD QHY294M monochrome camera to the CFW3M filter wheel and the OAG-M off-axis guider, camera sensor will be at 52mm from the female front thread (in the box you find 2 adapters: one with T2 42x0.72 female thread and one with 54x0.75 female thread shown in the bottom-left picture, together with the CFW3M 5x50,8mm filter wheel). Connection of the camera to the filter wheel allows to indipendently rotate the camera from filter wheel and off-axis guider and the camera is fixed with 3 120° screws.
By connecting camera to the filter wheel and off-axis guider, you have a very rigid body that allows to avoid unwanted flexures and doesn't occupy a long backfocus.
|Type:||Camera CMOS raffreddata|
|Resolution||4164 x 2796|
|Sensor dimensions (mm)||19,3 x 13|
|Sensor diagonal (mm)||23.2|
|Pixels dimensions (µm)||4.6|
|A/D converter||14 bit|
|Cooling||-35°C rispetto a T ambientale|
|Readout Noise (e-)||1e- at high gain|
|ST4 integrated autoguide port||No|
|Telescope interface||Filetto T femmina (42x0,75)|
|Connection to PC||USB 3.0|
|Power||External 12V 5A|