Computer

Using a normal computer to control the telescope creates many complications: EAGLE is the control unit created by PrimaLuceLab that includes a computer, as advanced power distribution system, with wireless and wired remote control and special sensors that simplifies your telescope! EAGLE is available in different configurations in order to fit your needs and budget, with an extended series of optional adapters in order to connect to any telescope and power any device.

3% more discount if you pay with bank transfer - insert product in cart to get discount

Be the first to review this product
PLAY is the astrophotography software developed by PrimaLuceLab in order to record beautiful pictures of the night sky in the simpler way and with the telescope you prefer! PLAY includes many features needed for astrophotography like focuser control to perfectly focus you image, mount control for alignment and pointing of many objects also with Auto...
ECCO2, environmental...
In Stock
€195.00
Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like SkyWatcher EQ6, HEQ5 and EQ5,...
1,0m Eagle power cable...
In Stock
EAGLE-type power cables

1,0m Eagle power cable extension cord 3A-8A

PL1000053
€46.00
Be the first to review this product
1,0m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.
ECCO-NTC adapter for Dew...
  • New
In Stock
€115.00
Be the first to review this product
ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe. ECCO-NTC is...
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...
0,5m Eagle power cable...
In Stock
EAGLE-type power cables

0,5m Eagle power cable extension cord

PL1000054
€45.00
Be the first to review this product
0,5m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.
EAGLE5 S computer for...
  • -€170.00
In Stock
€1,525.00 €1,695.00
Be the first to review this product
EAGLE5 is the most advanced all-in-one computer for telescopes and astrophotography, that simplifies remote control and power of telescopes and that allows you to control the devices you want with the Windows software you prefer. Inside the unique PLUS aluminum housing designed to be easily installed on your telescope and simplify cable management, the...
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
Guide scope support for ECCO
In Stock
€79.00
Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
EAGLE type connector for 3A...
In Stock
EAGLE-type power cables

EAGLE type connector for 3A power OUT ports

PL1000036
€15.00
Be the first to review this product
EAGLE type connector for 3A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
EAGLE type connector for...
In Stock
€15.00
Be the first to review this product
EAGLE type connector for power IN and 5A or 8A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
DX finder base
In Stock
Optical finders

DX finder base

PLLBACEDX
€29.00
Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
WiFi antennas for EAGLE
In Stock
Spare parts

WiFi antennas for EAGLE

PL3600087
€25.00
Be the first to review this product
These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2 dBi gain. Compatible with all the EAGLE models, 2 antennas included in every set.
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug with...
Temperature sensor for...
In Stock
€25.00
Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
EAGLE5 PRO computer for...
  • -€220.00
In Stock
€1,975.00 €2,195.00
Be the first to review this product
EAGLE5 PRO is the computer for telescopes and astrophotography that provides desktop class performance thanks to fast i5 processor, Industrial Grade 16 GB fast DDR4 memory, large and quick 500 GB SSD drive Industrial Grade (NVMe), added connectivity - now with 10 USB ports (1 x Thunderbolt 3 with USB-C type connector, 1 x Thunderbolt 4 with USB-C type...
Guide rings support plate...
  • New
Be the first to review this product
The "Guide rings support plate for ECCO" allows you to install the "60mm CompactGuide scope with PLUS 80mm guide rings" (PLLCG60) on the ECCO on a standard Vixen style finder shoe. This way you can use the guide scope with an autoguide camera or also with an eyepiece as an optical finder.
GPS antenna for EAGLE4
In Stock
Spare parts

GPS antenna for EAGLE4

PL3600088
€65.00
Be the first to review this product
This GPS antenna is included with every EAGLE4, EAGLE4 S and EAGLE4 PRO. This GPS antenna is not compatible with other and/or previous versions of the EAGLE control units.
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 3A) of the instrument they are designed for. On the other side they have the plug with screw to...
EAGLE EYE lens cap
  • New
In Stock
Spare parts

EAGLE EYE lens cap

PL3600099
€3.00
Be the first to review this product
EAGLE EYE lens cap protects lens of EYE sensor when not in use.
EAGLE5 XTM computer for...
  • -€300.00
In Stock
€2,695.00 €2,995.00
Be the first to review this product
EAGLE5 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast AMD Ryzen 3 5400U processor, Industrial Grade 32 GB fast DDR4 memory, and huge Industrial Grade 2TB SSD drive (NVMe). Thanks to dual LAN port, 10 USB ports (4x high speed USB 3.2 ports plus 6x USB 2.0 ports), new Inclinometer and Motion Detector sensors,...
Eagle-compatible power...
In Stock
€39.00
Be the first to review this product
The Eagle control unit can directly power supply SBIG STT and STF CCD camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

PrimaLuceLab ADVANTAGES :

* only for shipping weight lower than 35 Kgs